Nissan/Datsun 200SX/510/610/710/810/Maxima 1973-1984 Repair Guide

Injectors

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Proper positioning of the small washer

  1. Remove the injection tubes at the injector, then remove the spill tube assembly.
  2.  
  3. Unscrew the two mounting bolts and pull out the injectors and their washers.
  4.  

To install:

  1. Installation is in the reverse order of removal. Tighten the injector mounting nuts to 12-15 ft. lbs. (16-21 Nm). Tighten the injection tube-to-injector nut to 16-18 ft. lbs. (22-25 Nm). Always use a new injector small washer.
  2.  

 
label.common.footer.alt.autozoneLogo