Nissan/Datsun 200SX/510/610/710/810/Maxima 1973-1984 Repair Guide

Maintenance Reminder Lights

Print

WARNING LIGHT CONNECTOR LOCATIONS





Click image to see an enlarged view

Fig. Fig. 1 Harness connector for the oxygen sensor warning lamp-1981 200SX



Click image to see an enlarged view

Fig. Fig. 2 Harness connector for the oxygen sensor warning lamp-1982-84 810/Maxima

After 30,000 miles on Datsun/Nissan 1981 200SX Models, disconnect a green/green and white stripe wire under the right side of the instrument panel. On 810/Maxima models 1982-84 disconnect warning lamp harness connector at the left of the brake pedal.

RESETTING



U.S. Models

On models with a sensor relay, reset the relay by pushing or inserting a small screwdriver into the reset hole. Reset relay at 30,000 and 60,000 miles. At 90,000 miles, locate and disconnect warning light wire connector.

On models without sensor light relay and Canada models locate and disconnect the single warning light harness connector. The reminder light will no longer function.

 
label.common.footer.alt.autozoneLogo