Nissan/Datsun 200SX/510/610/710/810/Maxima 1973-1984 Repair Guide

Outside Mirrors

Print

REMOVAL & INSTALLATION



Manually Adjustable


Click image to see an enlarged view

Fig. Fig. 1 Design features of two common door finisher panels



Click image to see an enlarged view

Fig. Fig. 2 Remove the mirror mounting screws where indicated (arrows)



Click image to see an enlarged view

Fig. Fig. 3 Upon installation, apply sealer to the rear surface of the finisher panel

  1. Remove control knob handle.
  2.  
  3. Remove door corner finisher panel.
  4.  
  5. Remove mirror body attaching screws, and then remove mirror body.
  6.  
  7. Installation is in the reverse order of removal.
  8.  

Apply sealer to the rear surface of the door corner finisher panel during installation to prevent water leak.

Power Adjustable


Click image to see an enlarged view

Fig. Fig. 4 Exploded view of a typical power mirror installation

  1. Remove door corner finisher panel.
  2.  
  3. Remove mirror body attaching screws, and then remove mirror body.
  4.  
  5. Disconnect the electrical connection.
  6.  

It may be necessary to remove the door trim panel to gain access to the electrical connection.

  1. Installation is in the reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo