Nissan/Datsun 200SX/510/610/710/810/Maxima 1973-1984 Repair Guide

Signal and Marker Lights

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Install or remove the signal or marker light bulb as shown



Click image to see an enlarged view

Fig. Fig. 2 Unfasten the screw and remove the turn signal lens



Click image to see an enlarged view

Fig. Fig. 3 Push in and twist to remove the bulb socket from the turn signal lens



Click image to see an enlarged view

Fig. Fig. 4 Remove the attaching screws from the parking light lens



Click image to see an enlarged view

Fig. Fig. 5 Push in, twist and turn the parking light bulb



Click image to see an enlarged view

Fig. Fig. 6 Remove the attaching screws from the side marker light



Click image to see an enlarged view

Fig. Fig. 7 Lift off the reflective side marker lens



Click image to see an enlarged view

Fig. Fig. 8 Remove the attaching screw from the bulb socket



Click image to see an enlarged view

Fig. Fig. 9 Pull the marker light bulb from the socket



Click image to see an enlarged view

Fig. Fig. 10 Remove the attaching bolts from the tail light assembly



Click image to see an enlarged view

Fig. Fig. 11 Lift out the tail light assembly from the vehicle

Front Turn Signal and Parking Lights

  1. Remove turn signal/parking light lens with retaining screws.
  2.  
  3. Slightly depress the bulb and turn it counterclockwise to release it.
  4.  

To install:

  1. Carefully push down and turn bulb clockwise at the same time.
  2.  
  3. Install the turn signal/parking light lens with retaining screws.
  4.  

Side Marker Lights
  1. Remove side marker light lens with retaining screws.
  2.  
  3. Turn the bulb socket counterclockwise to release it from lens.
  4.  
  5. Pull bulb straight out.
  6.  

To install:

  1. Carefully push the bulb straight in.
  2.  
  3. Turn the bulb socket clockwise to install it in lens.
  4.  
  5. Install side marker light lens with retaining screws.
  6.  

Rear Turn Signal, Brake and Parking Lights
  1. Remove rear trim panel in rear of vehicle if necessary to gain access to the bulb socket.
  2.  
  3. Slightly depress the bulb and turn it counterclockwise to release it.
  4.  

To install:

  1. To install the bulb carefully push down and turn bulb clockwise at the same time.
  2.  
  3. Install trim panel if necessary.
  4.  

 
label.common.footer.alt.autozoneLogo