Nissan Frontier, Xterra 1998-05

Overhaul

Print

Inner CV-Joint



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the plug seal by tapping around the joint housing flange with a brass hammer.
  6.  
  7. Remove or disconnect the following:

    CV-joint boot clamps
     
    Snapring
     
    Spider assembly
     
    CV-joint housing
     
    CV-joint boot
     

  8.  

To install:


NOTE
Use new snaprings and plug seals for assembly.

  1. Install or connect the following:

    CV-joint boot
     
    CV-joint housing
     
    Spider assembly
     
    Snapring. Pack the joint with grease.
     
    CV-joint boot clamps
     
    Plug seal
     

  2.  
  3. Install the axle halfshaft to the vehicle.
  4.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the plug seal by tapping around the joint housing flange with a brass hammer.
  6.  
  7. Remove or disconnect the following:

    CV-joint boot clamps
     
    Snapring
     
    Spider assembly
     
    CV-joint housing
     
    CV-joint boot
     

  8.  

To install:


NOTE
Use new snaprings and plug seals for assembly.

  1. Install or connect the following:

    CV-joint boot
     
    CV-joint housing
     
    Spider assembly
     
    Snapring. Pack the joint with grease.
     
    CV-joint boot clamps
     
    Plug seal
     

  2.  
  3. Install the axle halfshaft to the vehicle.
  4.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the plug seal by tapping around the joint housing flange with a brass hammer.
  6.  
  7. Remove or disconnect the following:

    CV-joint boot clamps
     
    Snapring
     
    Spider assembly
     
    CV-joint housing
     
    CV-joint boot
     

  8.  

To install:


NOTE
Use new snaprings and plug seals for assembly.

  1. Install or connect the following:

    CV-joint boot
     
    CV-joint housing
     
    Spider assembly
     
    Snapring. Pack the joint with grease.
     
    CV-joint boot clamps
     
    Plug seal
     

  2.  
  3. Install the axle halfshaft to the vehicle.
  4.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the plug seal by tapping around the joint housing flange with a brass hammer.
  6.  
  7. Remove or disconnect the following:

    CV-joint boot clamps
     
    Snapring
     
    Spider assembly
     
    CV-joint housing
     
    CV-joint boot
     

  8.  

To install:


NOTE
Use new snaprings and plug seals for assembly.

  1. Install or connect the following:

    CV-joint boot
     
    CV-joint housing
     
    Spider assembly
     
    Snapring. Pack the joint with grease.
     
    CV-joint boot clamps
     
    Plug seal
     

  2.  
  3. Install the axle halfshaft to the vehicle.
  4.  

Outer CV-Joint



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the CV-joint boot clamps and push the boot away from the joint.
  6.  
  7. Remove the CV-joint from the axle shaft by tapping it with a brass hammer.
  8.  

To install:


NOTE
Use new circlips and boot clamps for assembly.

  1. Install the CV-joint to the axle shaft by tapping it with a brass hammer.
  2.  
  3. Pack the joint with grease.
  4.  
  5. Install the boot clamps.
  6.  
  7. Install the axle halfshaft to the vehicle.
  8.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the CV-joint boot clamps and push the boot away from the joint.
  6.  
  7. Remove the CV-joint from the axle shaft by tapping it with a brass hammer.
  8.  

To install:


NOTE
Use new circlips and boot clamps for assembly.

  1. Install the CV-joint to the axle shaft by tapping it with a brass hammer.
  2.  
  3. Pack the joint with grease.
  4.  
  5. Install the boot clamps.
  6.  
  7. Install the axle halfshaft to the vehicle.
  8.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the axle halfshaft from the vehicle.
  4.  
  5. Remove the CV-joint boot clamps and push the boot away from the joint.
  6.  
  7. Remove the CV-joint from the axle shaft by tapping it with a brass hammer.
  8.  

To install:


NOTE
Use new circlips and boot clamps for assembly.

  1. Install the CV-joint to the axle shaft by tapping it with a brass hammer.
  2.  
  3. Pack the joint with grease.
  4.  
  5. Install the boot clamps.
  6.  
  7. Install the axle halfshaft to the vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo