Nissan Frontier, Xterra 1998-05

Removal & Installation

Print

Ignition Coil Module



2.5L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the intake manifold.
    NOTE
    If just removing the number one spark plug, it is not necessary to remove the intake manifold.

  4.  
  5. Disconnect the harness connector from the ignition coil.
  6.  
  7. Remove the ignition coil.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

4.0L Engine
Left Bank
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine cover.
  4.  
  5. Remove the air cleaner case and air duct. (At the left bank side, remove the ignition coil).
  6.  
  7. Move aside the harness, harness bracket and hoses which are located above the ignition coil.
  8.  
  9. Disconnect the harness connector from the ignition coil.
  10.  
  11. Remove the ignition coil.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

Right Bank
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the intake manifold collector..
  4.  
  5. Move aside the harness, harness bracket and hoses which are located above the ignition coil.
  6.  
  7. Disconnect the harness connector from the ignition coil.
  8.  
  9. Remove the ignition coil.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo