Nissan Frontier, Xterra 1998-05

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Disconnect the stabilizer bar ends from the connecting rods.
  6.  
  7. Remove the stabilizer bar clamps. Remove the bushings.
  8.  
  9. Remove the stabilizer bar from the vehicle.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Install the clamp and bushings so they are positioned outside of the crimp ring on the stabilizer bar.
  4.  

 
label.common.footer.alt.autozoneLogo