Nissan Frontier, Xterra 1998-05

Removal, Packing & Installation

Print

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Locking hub or drive flange
     
    Brake caliper and support
     
    Wheel speed sensor, if equipped
     
    Axle halfshaft
     
    Outer tie rod ends
     
    Upper ball joint or steering knuckle bracket bolts
     
    Lower ball joint
     
    Steering knuckle
     
    Inner seal
     
    Thrust washer
     
    Spindle bearing
     

  4.  

To install:

  1. Install or connect the following:

    Spindle bearing. Coat the bearing with multi-purpose grease.
     
    Thrust washer
     
    Inner seal
     
    Steering knuckle
     
    Lower ball joint
     
    Upper ball joint or steering knuckle bracket bolts
     
    Outer tie rod ends
     
    Axle halfshaft
     
    Wheel speed sensor, if equipped
     
    Brake caliper and support
     
    Locking hub or drive flange
     
    Front wheel
     

  2.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Locking hub or drive flange
     
    Brake caliper and support
     
    Wheel speed sensor, if equipped
     
    Axle halfshaft
     
    Outer tie rod ends
     
    Upper ball joint or steering knuckle bracket bolts
     
    Lower ball joint
     
    Steering knuckle
     
    Inner seal
     
    Thrust washer
     
    Spindle bearing
     

  4.  

To install:

  1. Install or connect the following:

    Spindle bearing. Coat the bearing with multi-purpose grease.
     
    Thrust washer
     
    Inner seal
     
    Steering knuckle
     
    Lower ball joint
     
    Upper ball joint or steering knuckle bracket bolts
     
    Outer tie rod ends
     
    Axle halfshaft
     
    Wheel speed sensor, if equipped
     
    Brake caliper and support
     
    Locking hub or drive flange
     
    Front wheel
     

  2.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Locking hub or drive flange
     
    Brake caliper and support
     
    Wheel speed sensor, if equipped
     
    Axle halfshaft
     
    Outer tie rod ends
     
    Upper ball joint or steering knuckle bracket bolts
     
    Lower ball joint
     
    Steering knuckle
     
    Inner seal
     
    Thrust washer
     
    Spindle bearing
     

  4.  

To install:

  1. Install or connect the following:

    Spindle bearing. Coat the bearing with multi-purpose grease.
     
    Thrust washer
     
    Inner seal
     
    Steering knuckle
     
    Lower ball joint
     
    Upper ball joint or steering knuckle bracket bolts
     
    Outer tie rod ends
     
    Axle halfshaft
     
    Wheel speed sensor, if equipped
     
    Brake caliper and support
     
    Locking hub or drive flange
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo