Nissan Murano 2003-05

Removal & Installation

Print


NOTE
Before servicing, or working around, the SRS system, turn the ignition switch OFF, disconnect both battery cables and wait at least three minutes. When servicing, or working around, the SRS system do not work directly in front of the air bag module.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the BCM.
  6.  
  7. Disconnect the mode door motor electrical connector.
  8.  
  9. Remove the mode door motor retaining screws.
  10.  
  11. Remove the mode door motor.
  12.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo