Nissan Murano 2003-05

Brake Caliper

Print

Removal & Installation



  1. Remove wheels from vehicle.
  2.  
  3. Drain brake fluid.
  4.  
  5. Remove union bolts and torque member bolts, and remove brake caliper assembly.
  6.  

To install:

  1. Install disc rotor.
  2.  
  3. Install caliper assembly to the vehicle, and tighten bolts to the specified torque shown in the illustration.
  4.  
  5. Install brake hose to caliper assembly and tighten union bolts to the specified torque shown in the illustration.
  6.  


NOTE
Do not reuse the copper washer for union bolts. Attach brake hose to the brake hose mounting boss.

  1. Refill new brake fluid and bleed air. Refer
  2.  
  3. Install the tires to the vehicle.
  4.  



Click image to see an enlarged view

Fig. Rear disc brake caliper and related components

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely. Remove the tire and wheel assembly.
  4.  
  5. Drain brake fluid.
  6.  
  7. Remove union bolts and torque member bolts, and remove brake caliper assembly.
  8.  

To install:

  1. Install disc rotor.
  2.  
  3. Install caliper assembly to the vehicle, and tighten bolts to the specified torque shown in the illustration.
  4.  
  5. Install brake hose to caliper assembly and tighten union bolts to the specified torque shown in the illustration.
    NOTE
    Do not reuse the copper washer for union bolts. Attach brake hose to the brake hose mounting boss.

  6.  
  7. Refill new brake fluid and bleed air. Refer
  8.  
  9. Install the tires to the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo