Nissan Murano 2003-05

Shock Absorbers

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove wheel.
  4.  
  5. Remove bolt in lower side of shock absorber assembly.
  6.  
  7. Remove mounting seal bracket nuts from shock absorber upper side and remove shock absorber assembly from vehicle.
  8.  
  9. Installation is the reverse of removal. Perform final tightening of shock absorber lower side (rubber bushing) under unladen conditions with tires on level ground.
  10.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely. Remove the tire and wheel assembly.
  4.  
  5. Remove bolt in lower side of shock absorber assembly.
  6.  
  7. Remove mounting seal bracket nuts from shock absorber upper side and remove shock absorber assembly from vehicle.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Be sure to replace all non reusable components with new ones.
    NOTE
    Perform final tightening of the shock absorber lower side (rubber bushing) under unladen conditions with tires on level ground.

  4.  

 
label.common.footer.alt.autozoneLogo