Nissan Murano 2003-05

Relieving Fuel System Pressure

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the fuel pump fuse from the panel.
  4.  
  5. Start the engine and allow it to run until it stalls. Crank the engine for a few seconds to relieve additional fuel pressure.
  6.  
  7. Disconnect the negative battery cable.
  8.  
  9. When repairs are complete, replace the fuel pump fuse and connect the negative battery cable.
  10.  



Click image to see an enlarged view

Fig. Fuel pump fuse location

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuel pump fuse from the panel.
  4.  
  5. Start the engine and allow it to run until it stalls. Crank the engine for a few seconds to relieve additional fuel pressure.
  6.  
  7. Turn the ignition switch OFF.
  8.  
  9. Disconnect the negative battery cable.
  10.  
  11. When repairs are complete, replace the fuel pump fuse and connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo