Nissan Pathfinder 1996-05

Outside Mirrors

Print

Power Mirrors



Removal & Installation
Motor
1996-04 Models
With Type A Door

NOTE
Note that the step numbers correspond with the numbers in the door panel illustration.

  1. Remove inside handle escutcheon.
  2.  
  3. Remove door armrest. (Front door only)
  4.  
  5. Remove power window switches, then disconnect the connectors.
  6.  
  7. Remove door finisher cover. (Rear door only)
  8.  
  9. Remove bolts securing door panel.
  10.  
  11. Remove clips securing door panel.
  12.  
  13. Lift out door panel.
  14.  
  15. Remove clip securing inner cover from front corner of door.
  16.  
  17. Disconnect door mirror harness connector.
  18.  
  19. Remove bolts securing door mirror, then remove door mirror assembly.
  20.  
  21. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Door panel removal and installation-models with Type -A- door



    Click image to see an enlarged view

    Fig. View of the power mirror (4), retaining bolts (4), connector (3) and inner cover(2)-1996-04 models

  22.  

With Type B Door

NOTE
Note that the step numbers correspond with the numbers in the door panel illustration.

  1. For the front door, remove the inside handle escutcheon.
  2.  
  3. For the front door, remove the power window switch, then disconnect the connectors.
  4.  
  5. For the front door, remove the door armrest.
  6.  
  7. For the front door, remove the bolts securing the door panel.
  8.  
  9. For the front door, pull on door finisher to remove clips from door panel and remove door finisher, then disconnect glass hatch and fuel lid opener switch connector.
  10.  
  11. For the rear door, remove inside handle escutcheon.
  12.  
  13. For the rear door, remove power window switch, then disconnect the connector.
  14.  
  15. For the rear door, remove door armrest cap.
  16.  
  17. For the rear door, remove bolts securing door panel.
  18.  
  19. For the rear door, pull on door finisher to remove clips from door panel and remove door panel.
  20.  
  21. Remove clip securing inner cover from front corner of door.
  22.  
  23. Disconnect door mirror harness connector.
  24.  
  25. Remove bolts securing door mirror, then remove door mirror assembly.
  26.  
  27. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Door panel removal and installation (1 of 2)-models with Type -B- door



    Click image to see an enlarged view

    Fig. Door panel removal and installation (2 of 2)-models with Type -B- door



    Click image to see an enlarged view

    Fig. View of the power mirror (4), retaining bolts (4), connector (3) and inner cover(2)-1996-04 models

  28.  

2005 Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the adhesive front door sash cover.
  4.  
  5. Carefully pry out the power window/door lock switch assembly and detach the harness connectors.
  6.  
  7. Remove the pull handle escutcheon.
  8.  
  9. Remove the pull handle cover and remove screw.
  10.  
  11. Unfasten the screws, then lift armrest upward to release clips and remove armrest.
  12.  
  13. Detach the connector and remove the memory seat switch (if equipped).
  14.  
  15. Disconnect the lock cable and handle cable from door handle assembly.
  16.  
  17. Release clips and remove door panel.
  18.  
  19. Position the front door seal aside.
  20.  
  21. Disconnect the door mirror harness connector.
  22.  
  23. Remove the nuts and the door mirror assembly.
  24.  
  25. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the power mirror-2005 models

  26.  

 
label.common.footer.alt.autozoneLogo