Nissan Pick-ups and Pathfinder 1970-1988

Flywheel and Ring Gear

Print

REMOVAL & INSTALLATION



All Engines

The clutch cover and the pressure plate are balanced as an assembly; if replacement of either part becomes necessary, replace both parts as an assembly. If vehicle is equipped with a automatic transmission use this procedure as a guide. See exploded view of engine block assembly for flywheel/drive plate installation and quick torque reference.

  1. Remove the transmission, if the engine is installed in the truck.
  2.  
  3. Remove the clutch assembly, if equipped.
  4.  
  5. Remove the flywheel.
  6.  
  7. To install, use new flywheel bolts. Tighten the bolts in a criss-cross pattern to the proper torque.
  8.  

 
label.common.footer.alt.autozoneLogo