REMOVAL & INSTALLATION
See Figures 1, 2, 3, 4 and 5Four Cylinder Engines
- Remove the front cover.
- Pry the old seal from the cover with a pointed piece of plastic or wood. Do not use a screwdriver in order to avoid scratching the seal surface.
- Oil the lip of the new seal. Do not use grease. Press it into place, making sure the flat side faces forward and the lip faces the engine.
- Install the front cover.
The front oil seal is a part of the oil pump assembly. To replace the oil pump seal, please refer to the Oil Pump Removal and Installation procedures in this section.