Nissan Pick-ups and Pathfinder 1970-1988

Signal And Marker Lights

Print

REMOVAL & INSTALLATION



Front Turn Signal And Parking Lights

See Figures 1, 2, 3, 4, 5 and 6

  1. Remove turn signal/parking light lens with retaining screws.
  2.  
  3. Slightly depress the bulb and turn it counterclockwise to release it.
  4.  

To install:
  1. Carefully push bulb down and turn bulb clockwise at the same time.
  2.  
  3. Install the turn signal/parking light lens with retaining screws.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Removing the front turn signal



Click image to see an enlarged view

Fig. Fig. 2: Removing the front turn signal lens screw



Click image to see an enlarged view

Fig. Fig. 3: Removing the front turn signal lens



Click image to see an enlarged view

Fig. Fig. 4: Removing the side marker bulb



Click image to see an enlarged view

Fig. Fig. 5: Removing the front turn signal bulb



Click image to see an enlarged view

Fig. Fig. 6: Removing the front turn signal assembly electrical connection

Side Marker Lights

See Figures 7, 8, 9, 10, 11 and 12

  1. Remove side marker light lens with retaining screws.
  2.  
  3. Turn the bulb socket counterclockwise to release it from lens.
  4.  
  5. Pull bulb straight out.
  6.  

To install:
  1. Carefully push bulb straight in.
  2.  
  3. Turn the bulb socket clockwise to install it in lens.
  4.  
  5. Install the side marker light lens with retaining screws.
  6.  



Click image to see an enlarged view

Fig. Fig. 7: Removing the front side marker lamp



Click image to see an enlarged view

Fig. Fig. 8: Removing the front side marker lamp lens screw



Click image to see an enlarged view

Fig. Fig. 9: Removing the front side marker lamp lens



Click image to see an enlarged view

Fig. Fig. 10: Removing the front side marker lamp from lens



Click image to see an enlarged view

Fig. Fig. 11: Removing the front side marker lamp from socket



Click image to see an enlarged view

Fig. Fig. 12: Removing the rear license plate light

Rear Turn Signal, Brake And Parking Lights
  1. Remove rear trim panel if necessary to gain access to the bulb socket.
  2.  
  3. Slightly depress the bulb and turn it counterclockwise to release it.
  4.  
  5. To install the bulb, carefully push down and turn the bulb clockwise at the same time.
  6.  
  7. Install the trim panel if necessary.
  8.  

 
label.common.footer.alt.autozoneLogo