Nissan Pick-ups and Pathfinder 1970-1988

Stabilizer Bar

Print

REMOVAL & INSTALLATION



1988 Pathfinder
  1. Raise the truck and support it with safety stands.
  2.  
  3. Disconnect the stabilizer bar connecting rod at the body. Remove the retainer and cushion from the link.
  4.  
  5. Disconnect the stabilizer bar bracket and cushion from the axle housing.
  6.  
  7. Remove the stabilizer bar.
  8.  

To install:
  1. Position the stabilizer bar at the axle housing and install the bracket and cushion. Tighten the mounting bolts to 19-24 ft. lbs. (25-32 Nm).
  2.  
  3. Install the connecting rod to the body with the retainers and cushion. Tighten the mounting bolts to 19-24 ft. lbs. (25-32 Nm).
  4.  
  5. Lower the truck.
  6.  

 
label.common.footer.alt.autozoneLogo