Nissan Pick-ups and Pathfinder 1989-1995

Brake Pedal

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument lower finish panel and the lower air duct, as required.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Brake pedal assembly

  1. Remove the brake pedal return spring. Disconnect and remove the brake light switch.
  2.  
  3. Remove the clip and clevis pin.
  4.  
  5. Unbolt and remove the brake pedal assembly from the vehicle.
  6.  
  7. Installation is the reverse of the removal procedure. Check and adjust the brake pedal as required. Assure that the brake lights are fully functional.
  8.  

END OF SECTION



 
label.common.footer.alt.autozoneLogo