Nissan Pick-ups and Pathfinder 1989-1995

Cruise Control Module

Print

pCruise Control Module

REMOVAL & INSTALLATION



  1. Locate the control module. To access the control module, remove the panel below the steering column. With the panel removed, the control module is visible to the right of the steering column, above the gas pedal.
  2.  
  3. To remove the module, loosen and remove the retaining bolts securing the module to the bracket next to the steering column.
  4.  
  5. Disconnect the negative battery cable.
  6.  
  7. Disengage the electrical wiring from the module.
  8.  

On most applications, the module is retained by a clip. Pry back on the clip and slide the module from the bracket.

  1. Remove the module from the retaining bracket.
  2.  
  3. If necessary, remove the bracket from the vehicle.
  4.  

To install:
  1. If removed, install the retaining bracket.
  2.  
  3. Install the module to the bracket.
  4.  
  5. Engage the electrical wiring to the module.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo