Nissan Pick-ups and Pathfinder 1989-1995

Front Oil Seal

Print

REMOVAL & INSTALLATION



Z24i and KA24E Engines

See Figure 1

  1. Remove the front cover.
  2.  
  3. Pry the old seal from the cover with a pointed piece of plastic or wood. Do not use a screwdriver to avoid scratching the seal surface.
  4.  
  5. Oil the lip of the new seal. Do not use grease. Press it into place, making sure the flat side faces forward and the lip faces the engine.
  6.  
  7. Install the front cover.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Front cover oil seal-Z24i and KA24E engines

VG30i and VG30E Engines

The front oil seal is a part of the oil pump assembly. To replace the oil pump seal, please refer to the Oil Pump service procedures, earlier in this information.

 
label.common.footer.alt.autozoneLogo