REMOVAL & INSTALLATION
- With the door in the full open position, place a jack or stand under the door to support its weight when the bolts are removed. Place a rag between the door and the jack or stand to avoid damaging the painted surface.
- While supporting the door remove the upper and lower hinge attaching bolts and remove the door.
- Installation is the reverse of the removal procedure. Adjust the door for proper alignment.
See Figure 1
To adjust the door alignment, loosen the door hinge and door lock striker bolts, then move the door to the desired position. Once the door is properly aligned, tighten the hinge and/or striker bolts.
Make sure the weatherstrip contacts the body opening evenly to prevent the entry of water.