Nissan Pick-ups and Pathfinder 1989-1995

Headlight Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Pry out the horn pad and remove the steering wheel.
  4.  
  5. Remove the two screws securing the upper and lower column covers. Pry the two pieces apart, and place aside.
  6.  
  7. Identify and tag all the wire harness connectors encased in the column cover.
  8.  
  9. Remove the terminals from the connector.
  10.  
  11. Slide the combination switch assembly, ( a combined unit of the headlight switch, wiper switch and switch case) off the steering column.
  12.  
  13. Remove the two screws securing the headlight switch to the switch case, and separate.
  14.  

To install:
  1. Position the headlight switch to the switch case, and secure with the two retaining screws.
  2.  
  3. Install the combination switch assembly onto the steering column, making sure the tab on the combination switch aligns correctly with the hole on the steering column. Connect the electrical leads.
  4.  
  5. Install the column covers and secure with the retaining screws.
  6.  
  7. Install the steering wheel onto the column. Torque the steering wheel retaining nut to 22-29 ft. lbs. (29-39 Nm). Install the horn pad assembly.
  8.  
  9. Connect the negative battery cable and verify proper switch operation.
  10.  

 
label.common.footer.alt.autozoneLogo