The combination switch is the entire assembly of lever controlled switches which are mounted on the steering column. This includes the headlight, turn signal, and if equipped, cruise control switch on the left-hand side of the column, and the wiper/washer control switch on the right-hand side. These switches are secured to a central switch base by means of retaining screws.You can remove the entire combination switch and base assembly, or you can replace either of the switch housings mounted on each side of the base.
REMOVAL & INSTALLATION
The turn signal switch is an integrated part of the turn signal and, if equipped, cruise control portion of the combination switch assembly found on the steering column. Please refer to the Combination Switch procedure located in Suspension & Steering of this repair guide for service information.