Nissan Pick-ups and Pathfinder 1989-1995

Door Locks

Print

REMOVAL & INSTALLATION



  1. Remove the door panel and watershield. Remove the service hole cover.
  2.  
  3. Disconnect the outside opening linkage. Remove the two bolts and remove the door handle, if necessary.
  4.  
  5. Disconnect the lock cylinder control linkage.
  6.  
  7. Remove the knob and the child protector lever knob.
  8.  
  9. Remove the lock assembly screws and the door lock. If equipped with power locks, disengage the connector.
  10.  
  11. Remove the cylinder retaining clip and pull the cylinder from the door.
  12.  

To install:
  1. Coat door lock sliding surfaces with grease.
  2.  
  3. If removed, install the outside handle with the bolts.
  4.  
  5. Install the door lock solenoid linkage to the door lock.
  6.  
  7. Connect the link to the outside handle.
  8.  
  9. Install the knob and the child protector lock lever knob.
  10.  
  11. Install the door opening control link.
  12.  
  13. Install the door lock cylinder control linkage.
  14.  
  15. Install the door panel and watershield.
  16.  

 
label.common.footer.alt.autozoneLogo