Nissan Pick-ups and Pathfinder 1989-1995

Door Trim Panels

Print

REMOVAL & INSTALLATION



See Figures 1 through 11

  1. Fully lower the door glass.
  2.  
  3. Remove the arm rest, door lock knob and inside door handle escutcheon.
  4.  
  5. For vehicles with manual windows, remove the regulator handle which is retained by a spring clip.
  6.  
  7. Gently pry the door panel away from the door.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Interior side and floor trim removal procedures-Pathfinder

  1. Installation is the reverse of removal. For vehicles with manual windows, install the regulator handle (correct position) by aligning it with the one on the opposite door, them push it onto its shaft until the spring clips into place.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Remove the lock button first before removing the door panel



Click image to see an enlarged view

Fig. Fig. 3: Remove the plug to gain access to door panel retaining screws



Click image to see an enlarged view

Fig. Fig. 4: Remove the trim cover



Click image to see an enlarged view

Fig. Fig. 5: Remove the door handle trim



Click image to see an enlarged view

Fig. Fig. 6: Remove the power window switch trim panel



Click image to see an enlarged view

Fig. Fig. 7: After loosening the power window switch trim panel, disengage the electrical connection



Click image to see an enlarged view

Fig. Fig. 8: Remove all the necessary trim panels before removing the door panel clips



Click image to see an enlarged view

Fig. Fig. 9: View of the door panel retaining clip-clip must be installed in the hole straight



Click image to see an enlarged view

Fig. Fig. 10: Make sure the watershield plastic is in place before installing the door panel



Click image to see an enlarged view

Fig. Fig. 11: Interior side and floor trim removal procedures-Pick-up models

 
label.common.footer.alt.autozoneLogo