Nissan Pick-ups and Pathfinder 1989-1995

Fog Lamps

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disengage the lamp electrical connector.
  4.  
  5. Unscrew the bracket-to-bumper mounting bolts and remove the lamp.
  6.  
  7. Unscrew the two bezel retaining screws and remove the lens retaining bezel.
  8.  
  9. Carefully pull out the lens and disconnect it.
  10.  
  11. Unclip the bulb connector and then unclip the bulb retainer. Remove the bulb.
  12.  

To install:
  1. Install the new bulb and clip it into position. Connect the electrical lead.
  2.  
  3. Reconnect the lens and slide it into the frame.
  4.  
  5. Install the retaining bezel and tighten the two screws.
  6.  
  7. Engage the lamp connector, then install the lamp assembly to the bumper.
  8.  
  9. Connect the negative battery cable and check for proper operation.
  10.  

 
label.common.footer.alt.autozoneLogo