Nissan Pick-ups and Pathfinder 1989-1995

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



  1. Raise the vehicle and support it safely with jackstands.
  2.  
  3. Disconnect the electrical connections from the switch (right side of the transmission case).
  4.  
  5. Unscrew the switch and remove it from the transmission housing. When removing, be sure to position a drain pan under the transmission to catch any leaking fluid.
  6.  
  7. Install the switch and connect the electrical lead. Tighten the switch to 14-22 ft. lbs. (20-29 Nm). Lower the truck and check the fluid level.
  8.  

END OF SECTION



 
label.common.footer.alt.autozoneLogo