Nissan Pick-ups and Pathfinder 1989-1995

Extension Housing Oil Seal

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Raise the truck and support it with jackstands.
  2.  
  3. Disconnect the driveshaft at the rear of the transmission.
  4.  
  5. Install a seal puller (special tool ST33290001/J25810-A) to the extension housing. Put a rachet on the tool and remove the oil seal.
  6.  
  7. Position a new seal in the extension housing and then mount a seal drift (special tool ST33400001/J26082). Drive the seal into place using the drift and a mallet.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Removing the extension housing oil seal



Click image to see an enlarged view

Fig. Fig. 2: Installing the extension housing oil seal



Click image to see an enlarged view

Fig. Fig. 3: Special drift tool used to install the oil seal (A) should be 60mm and (B) should be 47mm

END OF SECTION



 
label.common.footer.alt.autozoneLogo