Nissan Pick-ups and Pathfinder 1989-1995

Shift Lever

Print

REMOVAL & INSTALLATION



See Figures 1 through 5

All models utilize a floor-mounted shift lever.

  1. Unscrew the shifter knob by turning it counterclockwise and then unclip the shifter dust boot where it connects to the console.
  2.  
  3. Slide the boot over the lever. Remove the lower boot retainer clip and slide the lower boot up the lever.
  4.  
  5. Using circlip pliers, remove the retaining circlip and remove the shift lever.
  6.  
  7. When installing the shift lever, use a new circlip and lower dust boot.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Remove the shifter boot retaining ring screws



Click image to see an enlarged view

Fig. Fig. 2: After removing the screws, lift the retainer ring up



Click image to see an enlarged view

Fig. Fig. 3: The boot must be lifted for access to the shifter circlip



Click image to see an enlarged view

Fig. Fig. 4: Remove the circlip to remove the shift lever with a pair of snapring pliers



Click image to see an enlarged view

Fig. Fig. 5: Remove the shift lever from the transmission assembly

END OF SECTION



 
label.common.footer.alt.autozoneLogo