Nissan Pick-ups and Pathfinder 1989-1995

Pinion Seal

Print

REMOVAL & INSTALLATION



  1. Raise the vehicle and support it with jackstands.
  2.  
  3. Drain the gear oil from the differential.
  4.  
  5. Remove the driveshaft assembly.
  6.  
  7. Remove the companion flange retaining nut, while recording the torque necessary to remove the retaining nut. Remove the companion flange and then pry out the oil seal.
  8.  

To install:
  1. Coat the cavity between the lips of the oil seal with grease and then install the oil seal.
  2.  
  3. Press the companion flange in and install the companion flange nut. Tighten the flange retaining nut to the recorded torque specification.
  4.  
  5. Install the driveshaft. Refill the differential with gear oil. Remove the stands and lower the vehicle.
  6.  

 
label.common.footer.alt.autozoneLogo