Nissan Pick-ups and Pathfinder 1989-1995

Panhard Rod

Print

REMOVAL & INSTALLATION



See Figure 1

Pathfinder Only
  1. Raise the vehicle and support the rear axle housing.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Removing the panhard rod mounting bolt

  1. Unbolt the rod.
  2.  
  3. Installation is the reverse of removal. Tighten the right side bolt to 80-108 ft. lbs. (108-147 Nm) and the left side bolt to 36-51 ft. lbs. (49-69 Nm) on 1989 models or 94-123 ft. lbs. (127-167 Nm) on 1990-95 models with the vehicle on the ground. Bounce the truck several times to set the suspension.
  4.  

 
label.common.footer.alt.autozoneLogo