Nissan Pick-ups and Pathfinder 1989-1995

Stabilizer Bar

Print

REMOVAL & INSTALLATION



See Figures 1 through 5

Pathfinder Only
  1. Raise the truck and support it with safety stands.
  2.  
  3. Disconnect the stabilizer bar connecting rod at the body. Remove the retainer and cushion from the link.
  4.  

  1. Disconnect the stabilizer bar bracket and cushion from the axle housing.
  2.  
  3. Remove the stabilizer bar.
  4.  

To install:
  1. Position the stabilizer bar at the axle housing and install the bracket and cushion. Tighten the mounting bolts to 19-24 ft. lbs. (25-32 Nm).
  2.  



Click image to see an enlarged view

Fig. Fig. 1: When removing and installing the stabilizer bar, secure portion A-Pathfinder



Click image to see an enlarged view

Fig. Fig. 2: Removing the stabilizer bar-to-rear axle housing mounting bolt



Click image to see an enlarged view

Fig. Fig. 3: View of the stabilizer bar-to-rear axle housing mounting-note position of rubber bushing



Click image to see an enlarged view

Fig. Fig. 4: Removing the stabilizer bar-to-connecting rod link nut



Click image to see an enlarged view

Fig. Fig. 5: View of the stabilizer bar-to-connecting rod link hardware

  1. Install the connecting rod to the body with the retainers and cushion. Tighten the mounting bolts to 19-24 ft. lbs. (25-32 Nm).
  2.  
  3. Lower the truck.
  4.  

 
label.common.footer.alt.autozoneLogo