Nissan Quest 2001-02 and 2004-06

Removal & Installation

Print

Front





Click image to see an enlarged view

Fig. Removing control panel-front

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the five control knobs from the control unit.
  6.  
  7. Remove cluster lid C, disconnect the front air control electrical connector.
  8.  
  9. Remove the screws securing the front air control to cluster lid
  10.  
  11. Remove the front air control.
  12.  
  13. To install, reverse removal procedure.
  14.  

Rear



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the rear air control from the headlining, located over the sliding door, RH.
  6.  
  7. Disconnect the rear air control electrical connector and remove the rear air control.
  8.  
  9. To install, reverse removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo