Nissan Quest 2001-02 and 2004-06

Coil Spring & Rear Lower Link

Print

Removal & Installation





Click image to see an enlarged view

Fig. Exploded view of rear suspension components-2004-2006



Click image to see an enlarged view

Fig. Rear suspension components legend-2004-2006

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the wheel and tire assembly using power tool.
  6.  
  7. Set a transmission jack or suitable tool, to relieve the coil spring tension and support the rear lower link.
  8.  
  9. Loosen the rear lower link adjusting bolt and nut connected to the rear suspension member, using power tool.
  10.  
  11. Remove the rear lower link bolt and nut from the wheel hub and spindle assembly using power tool.
  12.  
  13. Slowly lower the transmission jack to release the coil spring tension. Then remove upper rubber seat, coil spring and lower rubber seat from the rear lower link.
  14.  
  15. Remove the rear lower link adjusting bolt and nut from the rear suspension member using power tool, then remove the rear lower link.
  16.  
  17. To install, reverse removal procedure. Tighten all fasteners to specification.
  18.  

 
label.common.footer.alt.autozoneLogo