Nissan Quest 2001-02 and 2004-06

Front Lower Link

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the wheel and tire assembly using power tool.
  6.  
  7. Set a transmission jack or suitable tool, to relieve the coil spring tension and support the front lower link.
  8.  
  9. Disconnect the shock absorber lower end bolt using power tool.
  10.  
  11. Remove the front lower link adjusting bolt using power tool.
  12.  
  13. Disconnect the front lower link nut and bolt from the wheel hub and spindle assembly using power tool, then remove front lower link.
  14.  
  15. To install, reverse removal procedure. After installing the front lower link, check the wheel alignment and adjust if necessary.
  16.  

 
label.common.footer.alt.autozoneLogo