Nissan Quest 2001-02 and 2004-06

Stabilizer Bar (Sway Bar)

Print

Removal & Installation





Click image to see an enlarged view

Fig. Removing stabilizer bar

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. When removing and installing stabilizer bar, secure portion -A- as shown in the illustration.
  4.  
  5. When installing stabilizer bar and components, refer to illustration.

    Click image to see an enlarged view

    Fig. Installing stabilizer bar and components

  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect or remove the following:

    Stabilizer bar ends from the connecting rods using power tool
     
    stabilizer bar clamps using power tool, and remove the stabilizer bar bushings
     
    Stabilizer bar
     

  4.  
  5. To install, reverse removal procedure. Install the stabilizer bar bushing and clamp so they are positioned inside of the crimp ring on the stabilizer bar.
  6.  

 
label.common.footer.alt.autozoneLogo