Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Power Sunroof

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Fully close or tilt up the sunroof. Fully open the shade and remove the clips and side trim.
  2.  
  3. Close the sunroof lid and remove the 6 nuts from the back of the sunroof lid.
  4.  
  5. Lift the sunroof away from the roof.
  6.  
  7. Pull the shade forward and remove the 4 shade locks located beside the shade.
  8.  
  9. Remove the shade and motor assembly.
  10.  
  11. Disconnect the interior light harness and the front and rear drain hoses.
  12.  
  13. Remove the nuts and bolts securing the sunroof rails and remove.
  14.  

To install:
  1. Install the sunroof rails, nuts and bolts.
  2.  
  3. Connect the interior light harness and the front and rear drain hoses.
  4.  
  5. Install the shade and motor assembly.
  6.  
  7. Pull the shade forward and install the 4 shade locks located beside the shade.
  8.  
  9. Install the sunroof into the roof.
  10.  
  11. Close the sunroof lid and install the 6 nuts to the back of the sunroof lid.
  12.  
  13. Install the clips and side trim.
  14.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of a power sunroof assembly

 
label.common.footer.alt.autozoneLogo