Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

FRONT SUSPENSION

Print

See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Front suspension assembly-1982-86 vehicles



Click image to see an enlarged view

Fig. Fig. 2: Front suspension assembly-1987-90 vehicles



Click image to see an enlarged view

Fig. Fig. 3: Front suspension assembly-1991-96 vehicles

The independent front suspension system on all models covered uses MacPherson struts. Each strut combines the function of coil spring and shock absorber. The spindle is mounted to the lower part of the strut which has a single ball joint. No upper suspension arm is required in this design. The spindle and lower suspension transverse link (control arm) are located fore and aft by the tension rods to the front part of the chassis on most models. A cross-chassis sway bar is used on all models.

 
label.common.footer.alt.autozoneLogo