Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Heater Blower Motor

Print

REMOVAL & INSTALLATION



1982-87 Vehicles

See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Blower motor assembly-1982-87 vehicles



Click image to see an enlarged view

Fig. Fig. 2: Blower motor location-all models

The blower motor is located behind the glove box, facing the floor.

  1. Disconnect the electrical harness from the blower motor.
  2.  
  3. Remove the retaining bolts from the bottom of the blower unit and lower the blower motor from the case.
  4.  
  5. To install, reverse the removal procedures.
  6.  

1988-96 Vehicles

The blower motor is located behind the glove box.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the glove box assembly.
  4.  
  5. Disconnect the electrical harness from the blower motor.
  6.  
  7. Remove the retaining bolts from the bottom of the blower unit and lower the blower motor from the case.
  8.  

To install:
  1. Install the blower motor assembly and secure with retaining bolts.
  2.  
  3. Connect the electrical harness to the blower motor.
  4.  
  5. Install the glove box assembly.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo