Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Windshield Wiper Switch

Print

REMOVAL & INSTALLATION



1982-83 Vehicles
  1. Remove the steering wheel and the steering column cover as outlined in Suspension & Steering .
  2.  
  3. Disconnect all of the combination switch wires.
  4.  
  5. Loosen the retaining screw and remove the combination switch wires.
  6.  
  7. To install, reverse the removal procedures.
  8.  

1984-96 Vehicles

See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Removing wiper switch from the combination switch-1984-96 vehicles



Click image to see an enlarged view

Fig. Fig. 2: Removing combination switch from the steering column-all vehicles

The wiper switch can be removed without removing the combination switch from the steering column.

  1. Remove the steering column cover.
  2.  
  3. Disconnect the wiper switch electrical connector.
  4.  
  5. Remove the wiper switch to combination switch retaining screws.
  6.  
  7. To install, reverse the removal procedures.
  8.  

On the 1987-88 Pulsar models, the wiper switch is located in the dash. To remove this switch, detach the electrical connector and remove the retaining screw.

 
label.common.footer.alt.autozoneLogo