Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Tailgate/Hatch/Liftgate Lock and Latch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Raise the liftgate and remove the inner trim panel. Refer to door trim panel in this section.
  4.  
  5. Disconnect the control rods from the lock and latch assembly.
  6.  
  7. Remove the lock-to-liftgate retainer.
  8.  
  9. Remove the latch retaining bolts and remove the entire assembly from the gate.
  10.  

To install:
  1. Install the latch and lock to the liftgate. Torque the retaining bolts to 10 ft. lbs. (14 Nm).
  2.  
  3. Connect the control rods and install the trim panel.
  4.  
  5. Connect the negative battery cable and check operation.
  6.  

 
label.common.footer.alt.autozoneLogo