Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Back-Up Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: External transaxle component identification-RS5F31A transaxle shown, others similar

  1. Raise vehicle and support safely.
  2.  
  3. Disconnect the electrical connections.
  4.  
  5. Remove switch from transaxle housing, when removing place drain pan under transaxle to catch fluid.
  6.  

To install:
  1. Apply sealer to the switch and torque to 14-22 ft. lbs. (20-29 Nm).
  2.  
  3. Connect the electrical connector.
  4.  
  5. Check and if necessary, refill transaxle with fluid.
  6.  

 
label.common.footer.alt.autozoneLogo