Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Parking Brake Lever

Print

REMOVAL & INSTALLATION



  1. Remove the console.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Disconnect the parking brake cables and the parking brake warning light connector from the control lever assembly.
  6.  
  7. Remove the control lever assembly-to-chassis bolts and the assembly.
  8.  
  9. To install, reverse the removal procedures. Torque the control lever assembly-to-chassis bolts to 70-96 inch lbs. (8-11 Nm).
  10.  
  11. Install the parking brake cables and adjust the control lever.
  12.  
  13. Install the console.
  14.  

 
label.common.footer.alt.autozoneLogo