Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Axle Seals

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: With the halfshaft removed, pry the seal from the axle housing



Click image to see an enlarged view

Fig. Fig. 2: Using a seal installation tool, drive the new seal into position

  1. Following the procedures outlined above, remove the appropriate halfshaft from the vehicle.
  2.  
  3. Remove the seal from the case using a suitable prybar.
  4.  

To install:
  1. Press the seal into the case using a seal installer J25809 or equivalent.
  2.  
  3. Install the halfshaft assembly.
  4.  
  5. Recheck the fluid level in the differential and fill if necessary.
  6.  

 
label.common.footer.alt.autozoneLogo