Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Adjustment

Print

CONTROL CABLE



  1. Place the shift selector in P .
  2.  
  3. Loosen the control cable locknut and place the manual shaft in the P position.
  4.  
  5. Pull the control cable in the direction of extending the cable with 1.5 lbs. (6.9 N) of force.
  6.  
  7. Retract the control cable 0.039 in. (1.0mm) and tighten the control cable locknut.
  8.  
  9. Move the selector from P to 1. and make sure that the selector lever can be moved smoothly and without any sliding noise.
  10.  
  11. Apply heavy grease to all moving parts.
  12.  

 
label.common.footer.alt.autozoneLogo