Nissan Sentra/Pulsar/NX 1982-1996 Repair Guide

Windshield Washer Fluid Reservoir

Print

REMOVAL & INSTALLATION



Front and Rear
  1. Disconnect the negative battery cable and washer reservoir electrical connector.
  2.  
  3. Disconnect the fluid tube from the washer motor. If the tube is too tight to remove, do not force it. Heat the tube with a heat gun if the tube has no extra slack or cut the tube at the motor end.
  4.  
  5. Remove the reservoir retaining bolts and slide it out of the bracket.
  6.  
  7. Installation is the reverse of removal. Apply RTV sealant to the motor nipple before installing the washer tube.
  8.  

 
label.common.footer.alt.autozoneLogo