Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Halfshafts

Print

REMOVAL & INSTALLATION



See Figure 1

Refer to the Manual Transaxle procedures with this exception, insert a dowel or equivalent through the right side halfshaft hole and use a small mallet to tap the left halfshaft out of the transaxle case. Withdraw the shaft from the steering knuckle and remove it. Be careful not to damage the pinion mating shaft and the side gear while tapping the left halfshaft out of the transaxle case.



Click image to see an enlarged view

Fig. Fig. 1: Removing the left halfshaft on models with a automatic transaxle

 
label.common.footer.alt.autozoneLogo