Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Bumpers

Print

REMOVAL & INSTALLATION



Front and Rear

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Bumper assembly - early models

  1. Disconnect all electrical connectors at bumper assembly if so equipped.
  2.  
  3. Remove bumper mounting bolts and bumper assembly.
  4.  
  5. Remove shock absorbers from bumper.
  6.  


CAUTION
The shock absorber is filled with a high pressure gas and should not be disassembled, drilled or exposed to an open flame.

  1. Install shock absorbers and bumper in reverse order of removal.
  2.  

 
label.common.footer.alt.autozoneLogo