Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Hatchback or Tailgate Lid

Print

REMOVAL & INSTALLATION



  1. Open the lid and disconnect the rear defogger harness if so equipped.
  2.  
  3. Mark the hinge locations on the lid for proper relocation.
  4.  

ALIGNMENT



See Figures 1, 2 and 3

  1. Open the hatchback lid.
  2.  
  3. Loosen the lid hinge to body attaching bolts until they are just loose enough to move the lid.
  4.  
  5. Move the lid up and down to obtain a flush fit between the lid and the roof.
  6.  
  7. After adjustment is completed tighten the hinge attaching bolts securely.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Hatchback assembly-1988 200SX



Click image to see an enlarged view

Fig. Fig. 2: Tailgate assembly



Click image to see an enlarged view

Fig. Fig. 3: Hatchback assembly

 
label.common.footer.alt.autozoneLogo