Nissan Stanza/200SX/240SX 1982-1992 Repair Guide

Outside Mirrors

Print

REMOVAL & INSTALLATION



Manual Type

See Figures 1, 2 and 3

  1. Remove control knob handle.
  2.  
  3. Remove door corner finisher panel.
  4.  
  5. Remove mirror body attaching screws, and then remove mirror body
  6.  
  7. Installation is in the reverse order of removal.
  8.  

Apply sealer to the rear surface of door corner finisher panel during installation to prevent water leak.



Click image to see an enlarged view

Fig. Fig. 1: Two types of door corner finisher panels



Click image to see an enlarged view

Fig. Fig. 2: Removing mirror mounting screws



Click image to see an enlarged view

Fig. Fig. 3: Apply sealer to rear surface of finisher panel

Power Type

See Figure 4

  1. Remove door corner finisher panel.
  2.  
  3. Remove mirror body attaching screws, and then remove mirror body
  4.  
  5. Disconnect the electrical connection.
  6.  

It may be necessary to remove the door trim panel to gain access to the electrical connection.

  1. Installation is in the reverse order of removal.
  2.  



Click image to see an enlarged view

Fig. Fig. 4: Power mirror installation

 
label.common.footer.alt.autozoneLogo